8/24/08

TopTricks for Windows Xp

Disabling Scandisk

When Windows is not shut down correctly, it will perform an AutoCheck
using CHKDSK on the next restart.

AutoCheck is executed after a short time delay. AutoCheck can be
disabled or delayed by tweaking a few Registry settings.
Run ‘Regedit’ from ‘Start Menu|Run...’
Go to ‘HKEY_LOCAL_MACHINE|SYSTE
M|CurrentControlSet|Control|Session
Manager’.
Create a new DWORD value, or
modify the existing value, called
“AutoChkTimeOut” and set it according
to the value data below.
Value Name: AutoChkTimeOut.
Data Type: REG_DWORD (DWORD Value).
Value Data: Time in Seconds or 0 to disable
(default = 10).
Exit your registry, you may need to
restart or log out of Windows for the
change to take effect.


Monitoring the system

There are various applications you can use to monitor the state of your
system at any given time. One of them is a program called CoolMon (www.coolmon.org) where you can monitor about 22 of
the most geekiest system parameters like the temperature and speed of your system fans, the number of processes running, the total available memory on your hard disk and RAM, CPU utilization, etc. Each
of these can be individually con. gured to appear on the interface. Best of all, this monitoring happens in real time. Better still, the program is free.
If you need more details than what is offered by Windows System Information or the Device Manager, try out an application called Everest Home Edition (www.lavalys.com). This application hunts through your hardware and software setup and extracts every piece of information you might need about your processor, motherboard, graphics card,
hard disk and any other piece of hardware or software information that you might care to know about your computer.


Compress drive to save disk space

its not possible to increase ur memory size but u can compress ur data to save ur disk space, this feature is available in NTFS drive..
if u have a fat or fat32 drive, u can convert it to ntfs by running a command on dos:
for c drive:
convert c:/fs:ntfs
for d drive:
convert d:/fs:ntfs
for e drive:
convert e:/fs:ntfs
run the command similarly if u have more drive...

Compresing data in NTFS

* open my computer
* select any drive(drive with NTFS format)
* right click and select properties
* click on general tab
* select "compress drive to save disk space"
* Apply and OK

ur data will remain safe...


- Changing the Location of Special Folders
You can modify the registry to change the location of special folders like:

My Documents
Favorites
My Pictures
Personal
Start Regedit
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Double click on any locations you want to change and alter the path
Logoff or restart for the changes to go into effect


Eliminating the Right Click on the Taskbar
To eliminate the right click on the taskbar:

Start Regedit
Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer
Add a DWORD and give it a name of NoTrayContextMenu
Give it a value of 1
Reboot


Eliminating the Right Click on the Desktop
To eliminate the right click on the desktop:

Start Regedit
Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer
Add a DWORD and give it a name of NoViewContextMenu
Give it a value of 1
Reboot
These are only three tricks…..there are many more available on net…..the idea here is not to teach you how to disable right click or how to change the color, fonts, looks, etc…..The basic reason why we post this chapter is to teach that if registry is the place where all the information is stored then why cant we brake passwords from here???
E.g. I install a software on my system to guard some folders which contain material which I want to hide. In order to access the folder I have to input a password, and if it is right only then I can see the content of the folder. From this example it is clear that the password is stored somewhere in the system from where the software compares the value which I enter in the password field. For this example as well as for every other software which asks for password to access the system features including the windows login password, all these values are stored in windows registry. Whenever the user enters a password, it is compared with the value stored in the system registry, and if it is found correct only then the user is allowed to access the feature. In Windows registry we can search for specific items, keys, values or software’s using the search function in edit menu. But there is one problem the password is not stored in its original form, it is converted to some other format so that no one can recognize it. E.g.; If I set the password as “hacking” it is stored as “6167453291” or may be some other form depending upon the software. In such cases what we can do is reset the password i.e. delete the value (whatever it is). Once the value is deleted there is no password and our purpose is solved.

Top Tricks n Cheats

Set Processes Priority


Follow this tip to increase the priority of active processes, this will result in prioritisation of processes using the CPU.

CTRL-SHIFT-ESC
1.Go to the second tab called Processes, right click on one of the active processes, you will see the Set Priority option

2.For example, your Run your CDwriter program , set the priority higher, and guess what, no crashed CD’s

Shutdown Trick !

Imidiate rapid shut down window
while shutting down window. open task manager(Ctr+Alt+Del),
Select shut down tab. and press ' Ctrl ' key while select Turn Off from dis tab.
Count 5 4 3 2 1 Voila!!! U r window will rapidly shut down.


Speed Up Ur Shut down !!


Start Regedit.
Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
Click on the "Control" Folder.
Select "WaitToKillServiceTimeout"
Right click on it and select Modify.
Set it a value lower than 2000 (Mine is set to 200).

and !

Like previous versions of windows, it takes long time to restart or shutdown windows xp when the "Exit Windows" sound is enabled. to solve this problem you
must disable this useless sound. click start button then go to settings -> control panel -> Sound,Speech and Audio devices -> Sounds and Audio Devices -> Sounds, then under program events and windows menu click on "Exit Windows" sub-menu and highlight it.now from sounds you can select,choose "none" and then click apply and ok. now you can see some improvements when shutting down your system.


**new **

Crazy !!
Hide ur folders.. never known trick !!!!!!!!!! Disguise them to "Recycle Bin"


Rename any folder with extension {645FF040-5081-101B-9F08-00AA002F954E}
eg,
if u've a folder games
press F2,
then type, "games.{645FF040-5081-101B-9F08-00AA002F954E}"
c the magic....
then 2 get to original form,
remove the extension using
"ren games.{645FF040-5081-101B-9F08-00AA002F954E} games" in dos or as a bat file


n u are done..

~cheers~



System information

system up time only for xp professional edition
It boasts how long it can stay up. Whereas previous
versions of Windows were coy about how long they went
between boots, XP is positively proud of its stamina.
Go to the Command Prompt in the Accessories menu from
the All Programs start button option, and then type
'systeminfo'. The computer will produce a lot of
useful info, including the uptime. If you want to keep
these, type 'systeminfo > info.txt'. This creates a
file called info.txt you can look at later with
Notepad. (Professional Edition only).



lock pc just by double clicking mouse

You can lock your XP workstation with two clicks of
the mouse. Create a new shortcut on your desktop using
a right mouse click, and enter 'rundll32.exe
user32.dll,LockWorkStation' in the location field.
Give the shortcut a name you like. That's it -- just
double click on it and your computer will be locked.
And if that's not easy enough, Windows key + L will do
the same.




SPEED UP UR ACROBAT READER (ALMOST LIKE NOTEPAD)


Do u get irritated when acrobat reader takes 5/10 seconds to load when you want to open a pdf document. There is a way to speed up the loading.

1. Go to the installation folder of acrobat reader
(C:\program files\adobe\acrobat\reader\.. whatever)

2. Move all the files and folders from the "plugins" directory to the "Optional" directory. (I repeat.. cut and paste the files NOT copy & paste).

Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

Now your acrobat reader will load very fast
and almost as good as notepad..



Remove Stored username and Passwords !

To remove the Stored User Names and Passwords from your system, try this:
Click Start, Run and type Control keymgr.dll
Remove the entries from the list.
The other ways to access this dialog are:
Type Control Userpasswords2 in RUN box, click Advanced, Manage Passwords
-or-
From Control Panel, select your User Account, click Manage your network passwords

It Works

~ Cheers ~


*


Remove the Username and picture from Windows XP New Start Menu

The User account picture can be removed by turning off the Welcome Screen. Or, by switching to Windows Classic theme. Follow the method described in this article if you want to remove the username and picture from the Start Menu, without disabling the Welcome Screen and Windows XP Theme.

For those who want to remove the user name and user account picture from Start Menu, in order to have a blank blue panel at the top, try this:
Start Windows Explorer and go to this folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

From that folder, rename the BMP file which corresponds to your user account.
( For example, if your username is Robert, rename Robert.bmp to old_Robert.bmp )
Next, rename the following folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\Default Pictures

to something else, say...

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\No_Default Pictures
To remove the user name, follow these steps

Start regedit.exe and navigate to the this key:

HKEY_CURRENT_USER \ Software \ Microsoft\ Windows \ CurrentVersion \ Policies \ Explorer
In the right-pane, set NoUserNameInStartMenu value-data to 1

Close Regedit.exe and restart Windows.

You'll end up with a blue space at the top of the Start Menu.




To get back the username and the picture, reverse the above procedure.



For the New Start Menu, Windows XP looks for the .bmp file in the folder

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

If the file is not found, it takes a picture from the "Default Pictures" sub-folder. By renaming the .bmp and the "Default Pictures" folder, you're giving no chance for Windows to fetch an image for the Start Menu

~ Cheers ~.


Notepad Trick ! for complete list move to NOTEPAD TRICKS page !!


Well quite old but here is d complete collection

Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.

Voilla!!

or

1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON'T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.

or

Open a note pad
type Bush hid the facts
save that file,
close it
again open and see...



NOTEPAD "world trade centre trick".. :Rahul


Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.


log trick !! make ur Notepad a diary !!

Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.


WHY?

The reason this happens:

In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a "Byte-Order Mark" (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.

1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters

~ cheers ~



SPEED UP MENU DISPLAY.!!


When using the start menu the you will notice a delay between different tiers of the menu hierarchy. For the fastest computer experience possible I recommend changing this value to zero. This will allow the different tiers to appear instantly.

Start Regedit. If you are unfamiliar with regedit please refer to our FAQ on how to get started.

Navigate to HKEY_CURRENT_USER\Control Panel\Desktop
Select MenuShowDelay from the list on the right.

Right on it and select Modify.
Change the value to 0.
Reboot your computer.




CLICKING * .AVI FILES ON EXPLORER CAUSING 100% CPU USAGE.!!


Well windows seem to have a REALLY big problem when it comes to reading AVI files. It seems that when you click on an AVI file in explorer, it'll try to read the entire AVI file to determine the width,height, etc. of the AVI file (this is displayed in the Properties window). Now the problem with Windows is that if you have a broken/not fully downloaded AVI file that doesnt contain this info, Windows will scan the entire AVI file trying to figure out all these properties which in the process will probably cause 100% CPU usage and heavy memory usage. To solve this problem all you have to do is the following:
1. Open up regedit
2. Goto HKEY_CLASSES_ROOT\SystemFileAssociations\.avi\shellex\PropertyHandler
3. Delete the "Default" value which should be "{87D62D94-71B3-4b9a-9489-5FE6850DC73E}"
Voila! Please not that this will no longer provide you with the windows properties displaying the AVI file information such as width, height, bitrate etc. But its a small price to pay for saving you resources.
NOTE: Please use caution when using regedit. Improper usage may cause windows to behave imcorrectly. Also, I cannot be held resposible. Backup your registry first.


CD ROM STOPS AUTOPLAYING/AUTORUN.!!


And the AutoPlay Tab has disappeared in My Computer, Devices With Removable Storage, Right Click on CDROM, Properties.
Solution: The service: "Shell Hardware Detection" has been set to Manual or Disabled. Go to Control Panel, Administrative Tools, Services. Return this service to "Automatic".


How to make your Desktop Icons Transparent

Go to Control Panel > System, > Advanced > Performance area > Settings button Visual Effects tab "Use drop shadows for icon labels on the Desktop"



DISPLAY MESSAGE ON STARTUP.


Start regedit, if you are unfamiliar with regedit please see our FAQ.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify the key legalnoticecaption with what you want to name the window.
Modify the key legalnoticetext with what you want the window to say. Restart



AUTO DELETE TEMPORARY FOLDER.!!

ll what i prefer is %temp% " without quotes.. at Start -> Run..
this opens ur temp folder n den u cal erase it neatly// still try dis one too..


First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.



make ur pdf files to speak

make ur pdf files to speak
here r the shortcuts for hearing pdf files in abobe reader 6.0 or higher

ctrl+shift+b ---->to hear the whole topic
ctrl+shift+v ---->to hear the page

Internet Stuff Tricks n Hacks

Change Yahoo messenger title bar


Hey guys you can change the yahoo messenger title bar...
For this just find the folder messenger in the drive in which the messenger is installed. Then search a file named "ymsgr". In this file just go to the end and write the following code:
[APP TITLE]
CAPTION=Red Devil
Here you can write any name in place of Red Devil... then see the fun.... You can have your own name being placed in yahoo messenger title bar.



2) Enable Right Clicks on The Sites Dat Disable it


Lots of web sites have disabled the right click function of the mouse button... it's really, really annoying. This is done so that you don't steal (via right-click->save picture) their photos or images or any other goodies. Unfortunately, it disables ALL right-click functionality: copy, paste, open in new window.

It's easy to change, assuming your using IE 6:
Click "Tools"->"Internet Options"
Click the "Security" tab
Click "Custom Level"
Scroll down to the "Scripting" section
Set "Active Scripting" to "disable"
Click "Ok" a couple of times.

You'll probably want to turn this back to "enable" when your done... 'cause generally the javascript enhances a website.



lots more to come
share what u have
keep posting

Hacking Pssword Protected Website's

warning : For educational purpose only

i know dis is lame but just would like to share wid u.
have nothing for next half an hour so typing it.. lol
rahul


here are many ways to defeat java-script protected websites. Some are very simplistic, such as hitting
[ctl-alt-del ]when the password box is displayed, to simply turning offjava capability, which will dump you into the default page.You can try manually searching for other directories, by typing the directory name into the url address box of your browser, ie: you want access to www.target.com .

Try typing www.target.com/images .(almost ever y web site has an images directory) This will put you into the images directory,and give you a text list of all the images located there. Often, the title of an image will give you a clue to the name of another directory. ie: in www.target.com/images, there is a .gif named gamestitle.gif . There is a good chance then, that there is a 'games' directory on the site,so you would then type in www.target.com/games, and if it isa valid directory, you again get a text listing of all the files available there.

For a more automated approach, use a program like WEB SNAKE from anawave, or Web Wacker. These programs will create a mirror image of an entire web site, showing all director ies,or even mirror a complete server. They are indispensable for locating hidden files and directories.What do you do if you can't get past an opening "PasswordRequired" box? . First do an WHOIS Lookup for the site. In our example, www.target.com . We find it's hosted by www.host.com at 100.100.100. 1.

We then go to 100.100.100.1, and then launch \Web Snake, and mirror the entire server. Set Web Snake to NOT download anything over about 20K. (not many HTML pages are bigger than this) This speeds things up some, and keeps you from getting a lot of files and images you don't care about. This can take a long time, so consider running it right before bed time. Once you have an image of the entire server, you look through the directories listed, and find /target. When we open that directory, we find its contents, and all of its sub-directories listed. Let's say we find /target/games/zip/zipindex.html . This would be the index page that would be displayed had you gone through the password procedure, and allowed it to redirect you here.By simply typing in the url www.target.com/games/zip/zipindex.html you will be onthe index page and ready to follow the links for downloading.

view secure websites

If you are surfing on internet , you can see that some Websites are Secure and you cannot see them, you are somehow blocked to see the Secure site.
Now Fix the problem with seeing them Secrue sites (banks or online stores) i found this very usefull to me at my work....

Any way... what u need to do is make a new notepad file and write in it the followng DLL's.. just copy-paste these

regsvr32 SOFTPUB.DLL
regsvr32 WINTRUST.DLL
regsvr32 INITPKI.DLL
regsvr32 dssenh.dll
regsvr32 Rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 Cryptdlg.dll


and save it as > all file types, and make it something like securefix.bat.

then just run the file and ur problem shuld be gone

Hack Into a Windows XP Computer Without Changing Password

Another method to login to a password protected Windows even if you do not have the password is by making Windows accepting any passwords.
There is a far better way to get into Windows XP. It is easy and it does not reset the password. Hack into a computer running Windows XP without changing the password and find out all and any passwords on the machine (including admin accounts). You do not need access to any accounts to do this. Of course, do not do this on anyone elses computer without proper authorisation.





Steps to Hack into a Windows XP Computer without changing password:

1. Get physical access to the machine. Remember that it must have a CD or DVD drive.
2. Download DreamPackPL HERE.
3. Unzip the downloaded dreampackpl_iso.zip and you'll get dreampackpl.ISO.
4. Use any burning program that can burn ISO images.
5. After you have the disk, boot from the CD or DVD drive. You will see Windows 2000 Setup and it will load some files.
6. Press "R" to install DreamPackPL.
7. Press "C" to install DreamPackPL by using the recovery console.
8. Select the Windows installation that is currently on the computer (Normally is "1" if you only have one Windows installed)
9. Backup your original sfcfiles.dll by typing:
"ren C:\Windows\System32\sfcfiles.dll sfcfiles.lld" (without quotes)
10. Copy the hacked file from CD to system32 folder. Type:
"copy D:\i386\pinball.ex_ C:\Windows\System32\sfcfiles.dll" (without quotes and assuming your CD drive is D:)
11. Type "exit", take out disk and reboot.
12. In the password field, type "dreamon" (without quotes) and DreamPack menu will appear.
13. Click the top graphic on the DreamPack menu and you will get a menu popup.

14. Go to commands and enable the options and enable the god command.

15. Type "god" in the password field to get in Windows. You can also go to Passwords and select "Logon with wrong password and hash". This option allows you to login with ANY password. Note: I was unable to bring up the DreamPackPL for the first time because I have Kaspersky Anti-Virus already running in background. I believe most antivirus already labelled this tool as a Hack-Tool. A Hack-Tool is NOT a virus. DreamPackPL helps you bypass the Windows Login screen and it is not destructive.

Open command prompt from where it is Banned

Open command prompt from where it is Banned
Open up Command Prompt (Start>Run>Command.com)

Can't use command prompt at your school?

Open up Microsoft word..Type:

Command.com

Then save it as Somthing.bat.

Warning: Make sure you delete the file because if the admin finds out your in big trouble.


--Adding a user to your network--

Type:

Net user Haxxor /ADD

-----
That will add "Haxxor" onto the school user system.
-----
Now you added users lets delete them!

Type: Net user Haxxor /DELETE


Warning: Be carefull it deletes all their files.
-----
"Haxxor" will be deleted from the user system.

-----
Hmmm? It says access denied?

Thats because your not admin!

----
Now lets make your Admin!

----
This will make Haxxor an admin. Remember that some schools may not call their admins 'adminstrator' and so you need to find out the name of the local group they belong to.

Type: net localgroup

It will show you what they call admin, say at my school they calll it
adminstrator so then i would

Type: net localgroup administrator Haxxor /ADD

----

Getting past your web filter.

Easy way: Type whatever you want to go on say i wanted to go on miniclips bug on wire i would go to google and search miniclip bug on wire

then instead of clicking the link i would click "cached".

Hard way: I'm hoping you still have command prompt open.

Type: ping miniclip.com

And then you should get a IP type that out in your web browser, and don't forget to put "http://" before you type the IP.

-----
Sending messages throught your school server


Okay, here's how to send crazy messages to everyone in your school on a computer. In your command prompt, type

Net Send * "The server is h4x0r3d"

Note: may not be necessary, depending on how many your school has access too. If it's just one, you can leave it out.

Where is, replace it with the domain name of your school. For instance, when you log on to the network, you should have a choice of where to log on, either to your school, or to just the local machine. It tends to be called the same as your school, or something like it. So, at my school, I use

Net Send Haxxor School * "The server is h4x0r3d"

The asterisk denotes wildcard sending, or sending to every computer in the domain. You can swap this for people's accounts, for example

NetSend Varndean dan,jimmy,admin "The server is h4x0r3d"

use commas to divide the names and NO SPACES between them.

what say??
~Cheers~


or


Allowing dos and regedit in a restricted Windows


A very simple tactic I found after accidentally locking myself out of dos and regedit is to open notepad and type the following:
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesWinOldApp]
"Disabled"=dword:0
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:0

Save it as something.reg then run it. Simple.

Breaking the Restrictions of the Administrator

Breaking the Restrictions of the Administrator






A Loophole u never knew about : Rahul



This works on WIn 2000 & WIN XP.

Dis can be used to gain access to the website you want to
for free, and how you can gain access to 'control panel', and the various
other tools of Widows that may have been blocked from your grasp like 'regedit' by the administrator. IT can be used in schools & colleges..

When u are at the log on screen, type in your username and
password. NOW When you hit enter, and it comes up with
the next screen, the rectangle one, immediatly pull out the network
cable i.e. the cable wire.

Now u can log on without any restrictions because when the cable is pulled off then it does not download any settings from the server. Now you have access to control panel, & all the other features which had been blocked BUT there will be no
network access. But that's cool because now we can access 'Internet options',
click in the 'connections' tab click the LAN settings, click the proxy
settings, and in the little white box at the bottom we can specify websites
that bypass the proxy server (eg www.yahoo.com) Now once you have changed
the settings to what you wish, apply them and restart the computer. Now get someone else to log onto it because if you log in it will load the cached settings from your previous log in, then after the other person logs in, everyone that logs in after them included themselves will have the
internet settings you specified.

Its only an 'Unplugging technique' to gain access to a comp. locked by the administrator.

Now you can gain access to msconfig, regedit, command etc disable the virus scanner, or to install a trojan or a virus according to u're will..




XP HOME ADVANCED FILE PERMISSIONS.!!



Access *Advance file Permissions* on NTFS file systems for XP Home simply by booting into *Safe Mode*, rt-clicking any file or folder, and navigating to the *Security tab*. This gives the user the ability to allow or deny read, write, execute, read & write, display contents, full-control, iheritance, and take ownership permissions, with many more options available to apply to different users and groups stored on the computer. Well, you don't have to do this in *Safe Mode* (XP Home). Although it is a little less intuitive, you can simply go to your command prompt - Start>All Programs>Accessories>Command Prompt. Now type "cacls" in the window (without the quotes). This gives you the ability to add, remove or modify file permissions on files and folders through the command prompt. Type "cacls /?" for help on different options and variables. You do not need to be in safe mode to use this so it makes it a little quicker than using the safe mode security tab GUI. Remember - this only applies to NTFS. Here also is a very useful link to find a lot of extras and tweaks straight from the horse's mouth - the Microsoft Resource Center. You will find a lot of very useful web-based extra's here, most of them left unknowing to the general public - such as, "Online Crash Analysis" - a site that looks like Windows Update but you can upload your crash "dump logs" (when you get those system or application crash error reports). Microsoft will then analyze the log file and tell you some more info about WHY the system crashed (ie. faulty hardware/software/conflicts, etc).


Now lets c how to open restricted site on college servers
Rahul recommends : http://unblockall.net/

Bypass any filters from work or school and access your favorite community and entertainment sites
Enjoy a fast and reliable connection. Our dedicated machines have 1Gbps connection and 2 quad processors
Chat with your friends from work
Watch videos on Youtube
Login into Myspace, Facebook and all the popular community sites without losing the proxy
No traffic redirection
No PopUp and Annoying Ads!
To use our service, simply type the address of the web site which you want to open in the field above and hit GO. This will automatically lead you to the destination page. With our service you are guaranteed to be able to login and operatate normally.

Haking "admin" from "user" mode n more

really that is possible !
Refer to the other articles on this wiki for the same topic
as windows seems to have fixed this bug..
still u can browse for educational purpose

u know why is it a "user" account because it lacks come service layer than that in "administrator" account

Using simple command line tools on a machine running Windows XP we will obtain system level privileges, and run the entire explorer process (Desktop), and all processes that run from it have system privileges. The system run level is higher than administrator, and has full control of the operating system and it’s kernel. On many machines this can be exploited even with the guest account. At the time I’m publishing this, I have been unable to find any other mention of people running an entire desktop as system, although I have seen some articles regarding the SYSTEM command prompt.

Local privilege escalation is useful on any system that a hacker may compromise; the system account allows for several other things that aren’t normally possible (like resetting the administrator password).

The Local System account is used by the Windows OS to control various aspects of the system (kernel, services, etc); the account shows up as SYSTEM in the Task Manager

Local System differs from an Administrator account in that it has full control of the operating system, similar to root on a *nix machine. Most System processes are required by the operating system, and cannot be closed, even by an Administrator account; attempting to close them will result in a error message. The following quote from Wikipedia explains this in a easy to understand way:


You can trick the system into running a program, script, or batch file with system level privileges.

One sample

One trick is to use a vulnerability in Windows long filename support.
Try placing an executable named Program.*, in the root directory of the "Windows" drive. Then reboot. The system may run the Program.*, with system level privileges. So long as one of the applications in the "Program Files" directory is a startup app. The call to "Program Files", will be intercepted by Program.*.

Microsoft eventually caught on to that trick. Now days, more and more, of the startup applications are being coded to use limited privileges.



Quote:

In Windows NT and later systems derived from it (Windows 2000, Windows XP, Windows Server 2003 and Windows Vista), there may or may not be a superuser. By default, there is a superuser named Administrator, although it is not an exact analogue of the Unix root superuser account. Administrator does not have all the privileges of root because some superuser privileges are assigned to the Local System account in Windows NT.


Under normal circumstances, a user cannot run code as System, only the operating system itself has this ability, but by using the command line, we will trick Windows into running our desktop as System, along with all applications that are started from within.
Getting SYSTEM
I will now walk you through the process of obtaining SYSTEM privileges.
To start, lets open up a command prompt (Start > Run > cmd > [ENTER]).
At the prompt, enter the following command, then press [ENTER]:

Code:
at

If it responds with an “access denied” error, then we are out of luck, and you’ll have to try another method of privilege escalation; if it responds with “There are no entries in the list” (or sometimes with multiple entries already in the list) then we are good. Access to the at command varies, on some installations of Windows, even the Guest account can access it, on others it’s limited to Administrator accounts. If you can use the at command, enter the following commands, then press [ENTER]:


Code:
at 15:25 /interactive “cmd.exe”

Lets break down the preceding code. The “at” told the machine to run the at command, everything after that are the operators for the command, the important thing here, is to change the time (24 hour format) to one minute after the time currently set on your computers clock, for example: If your computer’s clock says it’s 4:30pm, convert this to 24 hour format (16:30) then use 16:31 as the time in the command. If you issue the at command again with no operators, then you should see something similar to this:

When the system clock reaches the time you set, then a new command prompt will magically run. The difference is that this one is running with system privileges (because it was started by the task scheduler service, which runs under the Local System account). It should look like this:

You’ll notice that the title bar has changed from cmd.exe to svchost.exe (which is short for Service Host). Now that we have our system command prompt, you may close the old one. Run Task Manager by either pressing CTRL+ALT+DELETE or typing taskmgr at the command prompt. In task manager, go to the processes tab, and kill explorer.exe; your desktop and all open folders should disappear, but the system command prompt should still be there.
At the system command prompt, enter in the following:


Code:
explorer.exe


A desktop will come back up, but what this? It isn’t your desktop. Go to the start menu and look at the user name, it should say “SYSTEM”. Also open up task manager again, and you’ll notice that explorer.exe is now running as SYSTEM. The easiest way to get back into your own desktop, is to log out and then log back in. The following 2 screenshots show my results (click to zoom):

System user name on start menu


explorer.exe running under SYSTEM

What to do now
Now that we have SYSTEM access, everything that we run from our explorer process will have it too, browsers, games, etc. You also have the ability to reset the administrators password, and kill other processes owned by SYSTEM. You can do anything on the machine, the equivalent of root; You are now God of the Windows machine. I’ll leave the rest up to your imagination.






ADMINISTRATOR IN WELCOME SCREEN.


When you install Windows XP an Administrator Account is created (you are asked to supply an administrator password), but the "Welcome Screen" does not give you the option to log on as Administrator unless you boot up in Safe Mode.
First you must ensure that the Administrator Account is enabled:
1 open Control Panel
2 open Administrative Tools
3 open Local Security Policy
4 expand Local Policies
5 click on Security Options
6 ensure that Accounts: Administrator account status is enabled Then follow the instructions from the "Win2000 Logon Screen Tweak" ie.
1 open Control Panel
2 open User Accounts
3 click Change the way users log on or log off
4 untick Use the Welcome Screen
5 click Apply Options
You will now be able to log on to Windows XP as Administrator in Normal Mode.



EASY WAY TO ADD THE ADMINISTRATOR USER TO THE WELCOME SCREEN.!!


Start the Registry Editor Go to:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList \
Right-click an empty space in the right pane and select New > DWORD Value Name the new value Administrator. Double-click this new value, and enter 1 as it's Value data. Close the registry editor and restart.

hacking I.P Via Msn,Yahoo,AIM

hacking I.P Via Msn,Yahoo,AIM


I tested this using MSN Live beta 8.0. i had MSN PLUS Live running but i doubt that would of effected it in any way..

Get IP via MSN logging:

You will need to go into tools > options > Connections > Advanced settings and click the Connection Logging checkbox..



Open up a Conversation with the target..
Send them like a blank notepad or any file..
Wait for them to cancel it or accept it, either works..
After your done that go back turn off your logs or else they will constantly update while your on msn..

then goto My documents > received files > MsnMsgr (text file)
Search (ctrl+f) “Connecttoip” and you will your selected items..
click the find next button until you find the IP address..



wallah! you have the IP address to whomever you attempted to send the file to. whether they cancel or accept the file dosent matter because it still logs the ip but they must do one of the two..

Get IP via Command Prompt:

1. goto start > run type cmd and open.. or goto start > programs > accessories > command prompt and click.

2. type netstat hit enter

3. connect to he person (direct connect) with the chat program of your choice. MSN, yahoo, AIM, etc.. This can be done simply by opening a conversation with the target or sending them any file.

4. type netstat again in the command prompt.

collective data should appear in the cmd box..ie: (infomation censored)